User Tools

Site Tools


invert_motor_direction

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
invert_motor_direction [2017/08/01 08:09]
Matthew Upp
invert_motor_direction [2017/11/21 09:28] (current)
Matthew Upp
Line 1: Line 1:
-==== M562 - Invert Stepper Motor Direction =====+~~NOTOC~~ 
 + 
 +====== M562 - Invert Stepper Motor Direction =====
 + 
 +----
  
 <WRAP center round info 100%> <WRAP center round info 100%>
-There shouldn'​t ​be a need for this but I will leave it here for now.+The only one of these that may be needed is the Extruder motor. For example, switching to Titan extruder.
 </​WRAP>​ </​WRAP>​
  
  
 +===== Extruder =====
 +<​code>​
 +M562 E                ;Inverts Extruder/​Feeder Mechanism motor direction
 +M500                  ;Saves changes to EEPROM
 +Reboot printer to complete the process (turn off, then on)
 +</​code>​
 +
 +
 +===== X-Axis =====
 <​code>​ <​code>​
-M562 E                ;Inverts Extruder motor direction 
 M562 X                ;Inverts X-Axis motor direction M562 X                ;Inverts X-Axis motor direction
 +M500                  ;Saves changes to EEPROM
 +Reboot printer to complete the process (turn off, then on)
 +</​code>​
 +
 +
 +===== Y-Axis =====
 +<​code>​
 M562 Y                ;Inverts Y-Axis motor direction M562 Y                ;Inverts Y-Axis motor direction
 +M500                  ;Saves changes to EEPROM
 +Reboot printer to complete the process (turn off, then on)
 +</​code>​
 +
 +
 +===== Z-Axis =====
 +<​code>​
 M562 Z                ;Inverts Z-Axis motor direction M562 Z                ;Inverts Z-Axis motor direction
 M500                  ;Saves changes to EEPROM M500                  ;Saves changes to EEPROM
-Reboot printer to complete the process+Reboot printer to complete the process ​(turn off, then on)
 </​code>​ </​code>​
  
invert_motor_direction.txt · Last modified: 2017/11/21 09:28 by Matthew Upp