Sidebar

User's Manual

Specifications

Donations & Support

Troubleshooting

Replacements Parts & Information

Mods & Improvements

How-to

Maintenance

WiFi

Web UI

OctoPrint

Slicer Stuff

Firmware

Downloads

Donations & Support

You are not allowed to perform this action
invert_motor_direction

M562 - Invert Stepper Motor Direction


If the Mini Delta is trying to home in the wrong direction then you may need to invert the XYZ motor direction

XYZ

M562 XYZ              ;Inverts X, Y, and Z motor direction
M500                  ;Saves changes to EEPROM
Reboot printer to complete the process (turn off, then on)

Extruder

M562 E                ;Inverts Extruder/Feeder Mechanism motor direction
M500                  ;Saves changes to EEPROM
Reboot printer to complete the process (turn off, then on)

Each axis can be inverted separately if needed for whatever reason.

X-Axis

M562 X                ;Inverts X-Axis motor direction
M500                  ;Saves changes to EEPROM
Reboot printer to complete the process (turn off, then on)

Y-Axis

M562 Y                ;Inverts Y-Axis motor direction
M500                  ;Saves changes to EEPROM
Reboot printer to complete the process (turn off, then on)

Z-Axis

M562 Z                ;Inverts Z-Axis motor direction
M500                  ;Saves changes to EEPROM
Reboot printer to complete the process (turn off, then on)
invert_motor_direction.txt · Last modified: 2019/11/20 22:56 by Matthew Upp