User Tools

Site Tools


Sidebar

User's Manual

Specifications

Donations & Support

Troubleshooting

Replacements Parts & Information

Mods & Improvements

How-to

Maintenance

WiFi

Web UI

OctoPrint

Slicer Stuff

Firmware

Downloads

Donations & Support

You are not allowed to perform this action
parts:extruder

Extruder


Watch Thomas Sanladerer calibrate his extruder.


Direct Replacement

Printable Replacements

Aftermarket Replacements

The MP Mini Delta uses a Right Hand MK8 Extruder. A few aftermarket replacements are listed below. Some listings will have a choice of left or right hand model. Be sure to choose “right” or “right hand”.

Amazon.com - Redrex Right Hand 1.75mm Filament MK8 Bowden Extruder

Amazon.com - Anycubic All Metal Right Hand MK8 Extruder (Gold Color)
NOTE: Requires two M3x20mm screws or two M3x25mm screws and maybe a couple of M3 washers that are not included.

eBay.com - 3D Printer MK8 1.75mm Filament Aluminum Alloy Extruder Kit W/ Bracket (Black & Red)


NOTE: This is optional but if you would like to keep the original/stock extruder gear, you will want to also purchase a 4x10x4mm bearing (examples linked below). The benefit is that you won't have to struggle to remove the existing gear and you won't have to recalibrate the extruder. Removing the existing gear can be troublesome but applying heat to the gear with a heat gun, lighter, small torch, or similar should make the task a little easier due to the thermal expansion of the gear. This should go without saying but please use a tool or something other than your hands to grasp the gear after heating.

McMaster-Carr - Stainless Steel Ball Bearing - Premium Double Shielded, for 4mm Shaft Diameter, 10mm OD

Amazon.com - uxcell 5 Pcs Double Sealed 4 x 10 x 4mm Deep Groove Ball Bearings L-1040

parts/extruder.txt · Last modified: 2019/08/20 08:10 by Matthew Upp