User Tools

Site Tools


Sidebar

User's Manual

Specifications

Donations & Support

Troubleshooting

Replacements Parts

Mods & Improvements

How-to

Maintenance

WiFi

Web UI

Slicer Stuff

Firmware

Downloads

Donations & Support

slicers:cura

Cura


Direct Downloads

Profiles

3.0.4 - cura_3_0_4_-_mpmd_-_20180101_0418.zip
Original profile created by: Brian Corbino
Original profile shared at: MP Mini Delta Owners Facebook Group
Original version created for: 3.0.3
Original filename: MPMD.zip
Original date shared: October 22, 2017
Profile last update: Check the .zip filename
Changes made to original profile: G29 line in the “machine_start_gcode” section of monoprice_delta_mini.def.json from G29 P6 C-0.8 Z0.30;(Level the bed.) to G29 C-0.8 Z0.30;(Level the bed.). This was to change it back to the User's Manual suggested setting.

NOTE: This profile works with Cura 3.0.4. This profile does not currently work with Cura 3.1.0.


Installation Instructions

  1. Run Cura at least once.
    • If you have never opened Cura:
      1. Open Cura
      2. Click “I understand and agree”
      3. Close the “Add Printer” wizard
      4. Close/Exit Cura
  2. Unzip the downloaded file to a destination of your choosing
  3. With Cura closed, copy the definitions, meshes, and quality folders into your user settings folder.
    • Windows: %USERPROFILE%\AppData\Roaming\cura\3.0
    • macOS: ~/Library/Application Support/cura/3.0
    • Linux: ~/.local/share/cura/3.0
  4. Open Cura
  5. From the “Add Printer” wizard click “Other” then scroll down until you find “Monoprice Mini Delta”

MP Mini Delta - Import Printer Profile for Cura 3.0.4
https://youtu.be/WBEvIpzILp8

slicers/cura.txt · Last modified: 2018/01/15 21:21 by Matthew Upp