User Tools

Site Tools


starting_ending_g-code_scripts

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Last revision Both sides next revision
starting_ending_g-code_scripts [2017/10/18 04:46]
Matthew Upp
starting_ending_g-code_scripts [2018/01/18 21:33]
Matthew Upp
Line 68: Line 68:
 G92 E0 ; reset extrusion distance G92 E0 ; reset extrusion distance
 G4 S5 ; pause for 5 seconds to allow time for removing extruded filament G4 S5 ; pause for 5 seconds to allow time for removing extruded filament
-G29 P6 Z0.36 ; 6x6 mesh with offset - YOU MAY NEED TO ADJUST THE Z OFFSET EXAMPLE: change "​Z0.36"​ to Z0.45 or Z0.2+G29 P5 Z0.36 ; 5x5 mesh with offset - YOU MAY NEED TO ADJUST THE Z OFFSET EXAMPLE: change "​Z0.36"​ to Z0.45 or Z0.2
 G1 Z60 ; raise Z 60mm to prepare for priming the nozzle G1 Z60 ; raise Z 60mm to prepare for priming the nozzle
 G1 E4 F300 ; extrude 4mm of filament to help prime the nozzle just prior to the start of the print G1 E4 F300 ; extrude 4mm of filament to help prime the nozzle just prior to the start of the print
starting_ending_g-code_scripts.txt · Last modified: 2018/03/14 05:59 by Matthew Upp