User Tools

Site Tools


starting_ending_g-code_scripts

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
starting_ending_g-code_scripts [2018/01/18 21:33]
Matthew Upp
starting_ending_g-code_scripts [2018/03/14 05:59] (current)
Matthew Upp
Line 68: Line 68:
 G92 E0 ; reset extrusion distance G92 E0 ; reset extrusion distance
 G4 S5 ; pause for 5 seconds to allow time for removing extruded filament G4 S5 ; pause for 5 seconds to allow time for removing extruded filament
-G29 P5 Z0.36 5x5 mesh with offset - YOU MAY NEED TO ADJUST THE Z OFFSET EXAMPLE: change "Z0.36" to Z0.45 or Z0.2+G29 P4 Z0.38 4x4 mesh (12-points) ​with offset - YOU MAY NEED TO ADJUST THE Z OFFSET EXAMPLE: change "Z0.38" to Z0.45 or Z0.2
 G1 Z60 ; raise Z 60mm to prepare for priming the nozzle G1 Z60 ; raise Z 60mm to prepare for priming the nozzle
 G1 E4 F300 ; extrude 4mm of filament to help prime the nozzle just prior to the start of the print G1 E4 F300 ; extrude 4mm of filament to help prime the nozzle just prior to the start of the print
starting_ending_g-code_scripts.txt · Last modified: 2018/03/14 05:59 by Matthew Upp